Tesla CEO Elon Musk confirmed that manufacturing of the corporate’s autonomous Cybercab will start in April 2026, and its manufacturing targets might be fairly formidable.
Talking at Tesla’s 2025 Annual Shareholder Assembly, Musk highlighted that the totally autonomous automobile would be the first Tesla designed particularly for unsupervised self-driving.
A robotaxi constructed for an autonomous world
Musk described the Cybercab as a clean-slate design optimized for autonomy, with no steering wheel, pedals, or facet mirrors. “It’s very a lot optimized for the bottom value per mile in an autonomous mode,” Musk mentionedincluding that each Tesla produced lately already carries the {hardware} wanted for full self-driving.
The Cybercab might be assembled at Giga Texas and can function the corporate’s flagship entry into the industrial robotaxi market. Musk emphasised that the undertaking represents Tesla’s subsequent evolutionary step in combining automobile manufacturing, synthetic intelligence, and mobility providers.
One Cybercab each ten seconds
Musk reiterated that the Cybercab’s manufacturing course of is extra carefully modeled on client electronics meeting than on conventional automotive manufacturing. This could pave the way in which for outputs that far exceed typical automotive merchandise.
“That manufacturing is occurring proper right here on this manufacturing unit, and we’ll be beginning manufacturing in April subsequent 12 months. The manufacturing system is not like every other automotive. The manufacturing system of the Cybercab, it’s nearer to a excessive quantity client electronics machine than it’s a automotive manufacturing line. So the online result’s that I believe we must always be capable to obtain, I believe, finally, lower than a 10-second cycle time, principally a unit each 10 seconds.
“What that might imply is you possibly can get on a line that might usually produce, say, 500,000 vehicles a 12 months at a one minute cycle time, Mannequin Y. This might be perhaps as a lot as 2 million or 3 million, perhaps finally it’s theoretically attainable to realize a 5 million unit manufacturing line if you will get to the 5-second cycle time,” the CEO mentioned.
